|
Position |
Job
Requirements |
Apply |
MANAGER
(HSE)
|
- Degree in Mechanical Engineering or any other Engineering discipline from a recognised institution.
- Minimum ten (10) years relevant working experience in the Health, Safety and Environment.
- Preferably, registered as a Professional Engineer with Board of Engineers, Malaysia.
- Well versed with the international standards of HSE requirements i.e NFPA, FM, etc and BOMBA.
- Able to lead HAZOP.
- Able to develop safety equipment layout and escape route drawings, hazardous area classification charts, HSE philosophy, QRA and HAZID.
- Able to understand firewater zoning, demand calculation, pumping configuration, and hydraulic analysis and lead the activities.
- Able to understand EERA, Blast Overpressure Study, Hot Gas/Exhaust Plume Study, Noise Study and coordinate the activities with the third parties.
- Able to provide required HSE input into other design deliverables developed by other engineering disciplines.
- Able to lead and administer a group of HSE Engineers, to ensure a continuous high performance of the HSE Department.
|
|
LEAD ENGINEERS
(CIVIL/STRUCTURAL, ELECTRICAL, INSTRUMENT, MECHANICAL/PIPING/ HVAC/ ROTATING EQUIPMENT, PROCESS)
|
- Degree in Chemical, Mechanical, Instrument, Electrical, Civil/Structural Engineering or any Engineering discipline from a recognised institution.
- Minimum 10 years working experience in related engineering discipline in the oil & gas/petrochemical industry.
- Experienced as a Lead Engineer with strong supervisory skills is an advantage.
- Preferably, registered as a Professional Engineer with the Board of Engineers, Malaysia.
- Experienced as a Lead Engineer with strong supervisory skills is an advantage.
- Good knowledge on international standards and codes.
|
|
SENIOR ENGINEER/ENGINEER
(CIVIL/STRUCTURAL, ELECTRICAL, INSTRUMENT, MECHANICAL/PIPING/ HVAC/ ROTATING EQUIPMENT, PROCESS)
|
- Degree in Chemical, Mechanical, Instrument, Electrical, Civil/Structural Engineering or any engineering discipline from a recognised institution.
- For Senior Engineer, minimum 5 years of working experience in a related engineering discipline in the oil & gas/petrochemical industry
- Foe Engineer, minimum 2 years of working experience in a related engineering discipline in the oil & gas/petrochemical industry.
- Senior Engineer, preferably registered with the Board of Engineers, Malaysia.
- Foe Engineer, must be registered as a Graduate Engineer with the Board of Engineers, Malaysia.
- Good knowledge of international standards and codes.
- Fresh graduates are encouraged to apply.
|
|
SENIOR ENGINEER/ ENGINEER, PIPELINE
(PIPELINE)
|
- Degree in Mechanical/ Structural/ Civil Engineering from a recognised institution.
- For Senior Engineer, minimum 5 years of working experience in a related engineering discipline in the oil & gas/petrochemical industry.
- For Engineer, minimum 2 years of working experience in a related engineering discipline in the oil & gas/petrochemical industry
- For Senior Engineer, preferably registered as a professional Engineer with Board of Engineers, Malaysia
- For Engineer, must be registered as a Graduate Engineer with the Board of Engineers.
- Strong knowledge of pipeline offshore and onshore/ riser engineering
- Knowledge of tools launching and receiving facilities.
- Good knowledge of international standards and codes.
- Must be registered as Graduate Engineer with Board of Engineers, Malaysia.
- Fresh graduates are encouraged to apply.
|
|
LEAD DESIGNERS
(CIVIL/STRUCTURAL, ELECTRICAL, INSTRUMENT, MECHANICAL/ PIPING, PROCESS)
|
- Diploma/Certificate in the relevant Drafting discipline from a recognised institution.
- At least ten (10) years of working experience as a Drafter/Designer in a related Drafting discipline in the oil & gas/petrochemical industry.
- For Designer (for Electrical Drafting) must be well versed in schematic and wiring diagram.
- Good knowledge of AutoCAD, BOCAD & PDMS.
- Possess good supervisory skills.
|
|
SENIOR DESIGNERS/ DESIGNERS
(CIVIL/STRUCTURAL, ELECTRICAL, INSTRUMENT, MECHANICAL/PIPING/ HVAC/ FIREFIGHTING, PROCESS)
|
- Diploma/Certificate in the relevant Drafting Discipline from a recognised institution.
- At least eight (8) years working experience as a Drafter/Designer in a related Drafting discipline in the oil & gas production facilities, petrochemical plant or related field.
- For Designer (for Electrical Drafting) must be well versed in schematic and wiring diagram.
- Good knowledge of AutoCAD, BOCAD & PDMS
- Possess good supervisory skills.
|
|
SENIOR DRAFTER/ DRAFTER
(CIVIL/STRUCTURAL, ELECTRICAL, INSTRUMENT, MECHANICAL/PIPING/ HVAC/ FIREFIGHTING, PROCESS)
|
- Diploma/Certificate in the relevant Drafting discipline from a recognised institution.
- Minimum one (1) year of working experience as a Drafter in related Drafting Discipline in the oil & gas production facilities, petrochemical or a related field.
- For Senior position, must have at least five (5) years of working experience as a Drafter in a related Drafting Discipline
- Good knowledge of AutoCAD
- Fresh graduates are encouraged to apply.
|
|
OPERATOR/ DESIGNER, PDMS & BOCAD
(STRUCTURAL)
|
- Diploma/Certificate in relevant Drafting Discipline from a recognised institution.
- Minimum eight (8) years of working experience as a Drafter/Designer in related Drafting discipline in the oil & gas production facility, petrochemical plant or related field.
- Good knowledge of AutoCAD with hands-on experience of PDMS/BOCAD
- Juniors with minimum one (1) year of working experience are encouraged to apply.
|
|
MANAGER
(PROJECT MANAGEMENT)
|
- Degree in any engineering discipline from a recognised institution.
- At least 15 years of working experience in Project Management in the oil & gas industry.
- Preferably registered as a Professional Engineer with the Board of Engineers, Malaysia.
- Familiar with contract terms and conditions pertaining to engineering designs and project management services.
- Possess the ability to effectively manage a multi disciplined project team and capable of working under minimum supervision.
|
|
SENIOR ENGINEERS/ ENGINEERS,
(PROJECT MANAGEMENT)
|
- Degree in any Engineering discipline from a recognised institution.
- For Senior Engineer, minimum of 5 years of working experience in project management in the oil & gas industry.
- For Engineer, minimum 2 years of working experience in project management in the oil & gas industry.
- For Senior Engineer, preferably registered as a Professional Engineer with the Board of Engineers, Malaysia.
- For Engineer, must be registered as a Graduate Engineer with the Board of Engineers, Malaysia.
- Familiar with contract terms and conditions pertaining to engineering design and project management services.
- Able to effectively manage a multi disciplined project team and assist the Manager in implementing project procedures.
- Fresh graduates are encouraged to apply.
|
|
MANAGERS, EPCC PROJECT
(EPCC)
|
- Degree in any Engineering Discipline from a recognised institution.
- At least 15 years of project management experience in Engineering, Procurement, Construction and Commissioning (EPCC) projects in the Oil & Gas, petrochemical or chemical industries.
- Familiar with contract terms and conditions pertaining to EPCC projects.
- Preferably registered as a Professional Engineer with the Board of Engineers, Malaysia.
- Able to effectively manage a multi disciplined project team.
- Excellent communication skills to liaise with technical employees and senior management of the company.
|
|
SENIOR PROJECT ENGINEER/ PROJECT ENGINEER, EPCC
(EPCC)
|
- Degree in any engineering discipline from a recognised institution.
- For Senior Project Engineer, 5 years working experience in EPCC projects management in the oil & gas industry.
- For Project Engineer, minimum 2 years of project management experience in EPCC projects in the oil & gas, petrochemical or chemical industries.
- For Senior Project Engineer, preferably registered as a professional Engineer with the Board of Engineers, Malaysia.
- For Project Engineer, must be registered as a Graduate Engineer with the Board of Engineers, Malaysia
- Familiar with contract terms and conditions pertaining to EPCC projects.
- Possess the ability to effectively manage a multi discipline project team and assist the Manager in implementing project procedures.
- Fresh graduates are encouraged to apply.
|
|
CONTRACT ENGINEER/ EXECUTIVE, EPCC
(EPCC)
|
- Degree in Quantity Surveying / Building or any Engineering discipline from a recognized institution.
- Minimum 5 years of working experience in the construction industry.
- Familiarity in both pre and post contract works is highly desirable including tender, contract review, drafting agreements, procurement and award of subcontract work
- Those able to produce detailed cash flow, project budgets and tenders will be given priority.
- Good negotiation skills to liaise with sub-contractor, contract administration & suppliers is an advantage
|
|
SITE MATERIAL COORDINATOR
(EPCC)
|
- Degree/Diploma in any discipline from a recognised institution
- Minimum 5 years of working experience preferably in the oil & gas industry.
- Proven experience in material control function such as tracking of inbound shipments, receiving, storing and delivery of materials to project site.
|
|
SENIOR ENGINEER/ ENGINEERS/ PLANNER
(PLANNING AND PROJECT CONTROL)
|
- Degree in Computer Science or any Engineering discipline from a recognised institution.
- For Senior Engineer, minimum 5 years of working experience in planning and project control preferably in the oil & gas industry
- For Engineer, minimum 2 years of working experience in planning and project control preferably in the in the oil & gas industry.
- Experienced in Primavera and Microsoft Project is required.
- Experienced in EPCC projects is an added advantage.
- Knowledge of preparing reports and analysing data.
- Fresh graduates are encouraged to apply.
|
|
SENIOR ENGINEER & ENGINEER, QUALITY ASSURANCE/ QUALITY CONTOL
(QUALITY ASSURANCE)
|
- Degree in Science or any Engineering discipline from a recognised institution and a qualified Auditor.
- For Senior Engineer, minimum 8 years of working experience in QA/QC with at least 5 years in the oil & gas industry
- For Engineer, minimum 5 years of working experience in QA/QC with at least 3 years in the oil & gas industry.
- Experienced in site construction and EPCC project is an added advantage,
- Experienced in writing and preparing procedures and reports.
- Strong knowledge of ISO 9001 Quality Management System and quality control techniques.
- Knowledge of ISO 14001 and OHSAS 18001 is an added advantage
- Knowledge of statistical techniques for data analysis.
- Those who do not meet the required experience level may be considered for junior positions
|
|
IT EXECUTIVE
(INFORMATION SYSTEM)
|
- Diploma/ Degree in Computer Science/ Information Technology or equivalent qualification from a recognised institution
- Professional Certification (eg: MCSE, MCDBA or CCNA) or experienced in Data Centre/Network Centre environment is an added advantage.
- Preferably Junior/Senior Executives specializing in IT/Computer Network/System/Database
- Knowledge of wireless networking is an advantage.
- Well versed with TCP/IP, routing protocols, internet connectivity, firewalls and security protocols.
- Must be well versed in Win XP.
- Strong technical, troubleshooting and analytical skills.
|
|
SECRETARY / SECRETARY PROJECT
(CORPORATE SERVICES)
|
- Certificate/ Diploma/ Advanced Diploma in Secretarialship or equivalent qualification.
- Minimum 2 years of relevant working experience.
- Excellent oral and written skills in English and Bahasa Malaysia.
- Excellent planning and organisational skills.
- Ability to prioritise work and met deadlines.
|
|
| |
|
|
All candidates must posses the following: -
- Good attitude, independent, results-oriented & able to work within timelines
- Mobile and willing to relocate to project site (local and overseas) as and when required.
- Team player with excellent communication & interpersonal skills and have the ability to communicate well with various levels.
- Good time management & organizational skills.
- Good leadership skills with high integrity, strong analytical, management & organizational skill, technically and commercially.
- Computer literate and good knowledge on computer software (Microsoft Office, etc).
|